|
WDT Series
OG Series
|
Charactistics:
|
 Extremely versatile
High speed
Strong, abrasive, resistant
Good heat resistance
Over-stampable
Both sheet-fed and rotary stamping
Adhesion to a variety of coated and un-coated paper and label stocks
Compatible stamping onto many inks, coatings and varnishes
Available shades: Golds and Silvers
|
|
|
|
BS Series
|
| Characteristics: |
Very high heat resistance
Very good embossing properties
Fine/medium to heavy coverage
Wide variety of various inks, coatings and varnishes
Coated and un-coated paper stocks
Available shades: Golds and Silvers, Colors 44 - 64 - 70
|
|
|
|
KP Series
|
The KP Series is a "trouble shooting" foil for the most demanding
applications where other foils do not adhere. The KP Series was
especially formulated as a Premium Grade foil to stamp over difficult
coatings, inks and films. This unique foil is capable of very high speed
production, while maintaining extremely sharp definition.
Coated board, over UV, water based, conventional and hybrid inks,
film and various coatings include some difficult UV cured coatings.
Very fine line to broad.
Available shades: 10 - 14 - 23 - 26 - 28 - 37
|
|
|
Plated Colors
|
|
GC Series
|
| Characteristics: |
Fine to heavy coverage
Excellent embossing properties
Strong abrasive resistance
High speed release
Over-stampable
Adhesion to a variety of coated and un-coated paper and label stocks
Compatible stamping onto many inks, coatings and varnishes
Available shades: metallic colors
|
|
|
|
|
Plastic
Gold and Silver
|
| M-PL SERIES |
M-METALLIC PL-PLASTIC |
| Finish: |
Metallic |
| Carrier Film: |
0.00048" Polyester (12 micron) |
|
PRODUCT FEATURES:
M-PL series is a clean cutting, tape resistant series developed for metal die stamping onto high-density polyethylene and polypropylene. This product can also be used for L.D.P.E, Polystyrene and PVC. The M-PL series has excellent alcohol and chemical resistance, which makes it well suited for cosmetic containers and closures. Our M-PL products contain no heavy metals and is in compliance with all "Heavy Metals in Packaging" legislation.
|
| SHADES AVAILABLE: |
Silver M-PL 10, Gold M-PL 22, and Gold M-PL 23
|
| RECOMMENDED STAMPING CONDITIONS |
|
DIE FACE TEMPERATURE
|
| SUBSTRATES |
Rubber Die |
Metal Die |
| Polypropylene |
400°F |
350°F |
| H.D.P.E. |
400°F |
350°F |
| Styrene's |
325°F |
250°F |
|
|
|
| M-P SERIES |
M-METALLIC P-POLYOLEFIN |
| Finish: |
Metallic |
| Carrier Film: |
0.00048" Polyester (12 micron) |
|
PRODUCT FEATURES:
M-P is a fine coverage, clean cutting series developed for stamping onto Polyolefin's. The M-P series has good tape, alcohol and chemical resistance, making it well suited for these applications. Our M-P products contain no heavy metals and is in compliance with all "Heavy Metals in Packaging" legislation.
|
| SHADES AVAILABLE: |
10 20 22 24
|
| RECOMMENDED STAMPING CONDITIONS |
|
DIE FACE TEMPERATURES
|
| SUBSTRATE: |
Rubber Die |
Metal Die |
| Plastics: |
325°F - 375°F |
250° F- 300°F |
|
|
|
| M-S SERIES |
M-METALLIC S-STYRENE |
| Finish: |
Metallic |
| Carrier Film: |
0.00048" Polyester (12 micron) |
|
| PRODUCT FEATURES |
M-S Series is a fine line, clean cutting, tape resistant series developed for stamping onto rigid plastics including styrenics and ABS. The M-S Series has good alcohol and chemical resistance which makes it well suited for these applications. Our M-S products contain no heavy metals and is in compliance with all "Heavy Metals in Packaging" legislation.
|
| RECOMMENDED STAMPING CONDITIONS |
|
DIE FACE TEMPERATURES
|
| SUBSTRATE: |
Rubber Die |
Metal Die |
Styrenics
ABS |
325°F - 350°F |
250° F- 275°F |
|
|
|
| M-P-HP SERIES |
M-METALLIC P-POLY HP-HIGH PERFORMANCE |
| Finish: |
Metallic |
| Carrier Film: |
0.00048" Polyester (12 micron) |
|
| PRODUCT FEATURES |
The M-P-HP Series of foils are designed for vertical stamping and peripheral marking onto polypropylene and polystyrene where a particularly high performance foil is required. The M-P-HP is suitable for cosmetic and appliance applications.
|
SHADES AVAILABLE:
10 21 |
| RECOMMENDED STAMPING CONDITIONS |
|
DIE FACE TEMPERATURES
|
| SUBSTRATE: |
Rubber Die |
Metal Die |
| Polypro/Polystyrene: |
325°F - 375°F |
250° F- 275°F |
|
